Table of Contents
Advertisement
ZyXEL
Field
Seed
Router
Frame Type
IPX
Network #
Once you have completed filling in menu 3.3, press ENTER to save your selections or
press ESC at any time to cancel your selections.
9.6.
A typical LAN-to-LAN application is to use the Prestige to call from a branch office to
headquarters such that all of the stations on the branch office network have access to the
server at the headquarters, as depicted in the following diagram:
Figure 9-1 LAN-to-LAN application
For the branch office, you need to configure a remote node in order to dial out to
headquarters.
9.6.1.
Follow the procedure in Chapter 6 to fill the protocol-independent parameters in Menu 11-
Remote Node Profile. For the IPX specific parameters, follow the ensuing instructions. If
Page 9-4
Description
Yes if the Prestige is to act as a seed router. No if there is a NetWare
server providing the network number
You can select one or more of these four frame types - 802.2, 802.3,
Ethernet II, SNAP.
Provide a unique network number for each frame type enabled, if the
Prestige to act as a seed router .
LAN-to-LAN Application
Remote Node Setup
Prestige 128IMH User's Guide
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Advertisement
Table of Contents
