ZyXEL Communications Prestige 128IMH User Manual page 102

ZyXEL
Field
IPX Packet Type
Destination/Source Network #
Destination/Source Node #
Destination/Source Socket #
Destination/Source Socket #
Comp
Operation
Table 12-1 Fields in Menu 21.1.3 - IPX Filter Rule
Once you have completed filling in Menu 21.1.3 - IPX Filter Rule, press ENTER at the
message: 'Press ENTER to Confirm ... ' to save your configuration or press ESC at any
time to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary.
Page 12-10
Prestige 128IMH User's Guide
Description
Enter the IPX packet type value of the packet you
wish to filter. This value should be two hex bytes.
Enter the four hex byte destination/source network
numbers of the packet that you wish to filter.
Enter in the six hex byte value for the
destination/source node number of the packet you
wish to filter.
Enter the destination/source socket number of the
packets that you wish to filter. This should be a 4-byte
hex value.
You can select what comparison quantifier you wish
to use to compare to the value given in Destination
Socket # and Source Socket #.
This field is only active if one of the Socket # fields is
0452 or 0453 indicating SAP and RIP packets. There
are seven choices for this field, which determines the
operation for the IPX packet.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C