ZyXEL Communications Prestige 128IMH User Manual page 116

ZyXEL
Syslog and Accounting can be configured in Menu 24.3.2 - System Maintenance - Syslog
and Accounting. This menu configures the Prestige to send UNIX syslogs to another
machine.
Menu 24.3.2 - System Maintenance - Syslog and Accounting
Press Space Bar to Toggle.
Figure 16-1 Menu 24.3.2 - System Maintenance - Syslog and Accounting
You needs to configure the following 3 parameters to activate syslog:
Field
Active
Syslog IP
Address
Log Facility
The Prestige sends three different types of syslog messages: Call information messages (i.e.,
CDR), Error information messages and Session information messages. Some examples of
these messages are shown below:
Call Information Messages:
line 1 channel 1, call 41, C01, Incoming Call, 40001
line 1 channel 1, call 41, C01, ANSWER Connected, 64K 40001
line 1 channel 1, call 41, C01, Incoming Call, Call Terminated
Error Information Messages:
line 1, channel 1, call 44, E01, CLID call refuse
line 1, channel 1, call 45, E02, IP address mismatch
Session Information Messages:
line 1, channel 1, call 41, I01, IPCP up, 306L
line 1, channel 1, call 41, I01, IPCP down, 306L
Page 16-6
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Press ENTER to Confirm or ESC to Cancel:
Description
Use the space bar to turn the syslog option on or off.
Input the IP Address of the syslog server that you wish to send your
syslog to.
Use the space bar to toggle between the different local choices.
Prestige 128IMH User's Guide
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C