ZyXEL Communications Prestige 128IMH User Manual page 87

Prestige 128IMH User's Guide
Field
Route Name
Active
Ether
Address
IP Address
Gateway
Node
Table 10-1 Edit Bridge Static Route Fields
Once you have completed filling in the menu, press ENTER at the message: 'Press ENTER
to Confirm ... 'to save your selections or press ESC at any time to cancel your selections.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Description
For identification purposes enter a name for the bridge static route.
Indicates whether the static route is active or not.
Enter the Ethernet address of the destination device that you wish to bridge
your packets to.
If available, enter the IP address of the destination device that you wish to
bridge your packets to.
Enter the number of the remote node that is the gateway for this static route.
When an incoming packet¡ ¦ s destination Ethernet address matches the
value entered in Step 3 above, then it will trigger a call to this remote node.
ZyXEL
Page 10-5