ZyXEL Communications Prestige 128IMH User Manual page 40

ZyXEL
Figure 4-1 TCP/IP and DHCP Ethernet Setup
Field
DHCP
Client IP Pool Starting
Address
Size of Client IP Pool
Primary/ Secondary DNS
Server
IP address
IP Subnet Mask
RIP Direction
Version
Table 4-1 Fields in TCP/IP and DHCP Ethernet Setup
Page 4-8
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup:
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Press ENTER to Confirm or ESC to Cancel:
Field Description
This field determines what mode of DHCP support the
Prestige should use – None or Server
This is the first address in the block of available IP
Addresses.
Gives the size of the block of addresses reserved for
DHCP address assignment.
Enter the IP addresses of the Domain Name System
(provided by your ISP). These addresses are passed to
the client computers on your network.
Enter a unique IP address of the Prestige in dotted
decimal notation.
The Prestige automatically calculates this mask based
on the IP address that you assign.
Select Both, In Only or Out Only.
Select Rip-1, Rip-2B or Rip-2M..
Prestige 128IMH User's Guide
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C