ZyXEL Communications Prestige 128IMH User Manual page 112

ZyXEL
Chan
--
--
Figure 16-1 Example of Menu 24.1 - System Maintenance - Status
Field
Chan
Link
Type
TXPkt
RXPkt
Error
CLU
ALU
Up Time
Total Outgoing call
Time
Page 16-2
Menu 24.1 - System Maintenance - Status
Link Type
Down 0Kbps
Down 0Kbps
Total Outcall Time:
Ethernet:
Status: 4 Port Hub
TX Pkts: 230
RX Pkts: 0
Collisions: 0
LAN Packet Which Triggered Last Call:
COMMANDS: 1-Drop B1
Description
shows statistics for B1 and B2 channels respectively. This is the
information displayed for each channel:
shows the name of the remote node or the user the channel is
currently connected to or the status of the channel (Idle, Callingor
Answering).
the current connecting speed (56K or 64K).
the number of transmitted packets on this channel.
the number of received packets on this channel.
the number of error packets on this channel.
(Current Line Utilization) percentage of current bandwidth used on
this channel
(Average Line Utilization) average CLU for this channel
time this channel has been connected to the current remote node.
shows the total outgoing call time for both B1 and B2 channels
since the system has been powered up.
Prestige 128IMH User's Guide
TXPkts RXPkts
0 0
0 0
0:00:00
WAN:
Chan 1 IP Addr:
Chan 2 IP Addr:
Port 1 CLID:
Port 2 CLID:
Press Command:
2-Drop B2 3-Reset Counters
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Errors CLU ALU Up Time
0 0% 0 0:00:00
0 0% 0 0:00:00
4-Drop All ESC-Exit