ZyXEL Communications Prestige 128IMH User Manual page 73

Prestige 128IMH User's Guide
Field
Route Name
Active
Destination IP
Address
IP Subnet
Mask
Gateway IP
Address
Metric and
Private
Table 8-1 Edit IP Static Route Fields.
Once you have completed filling in the menu, press ENTER at the message: 'Press ENTER
to Confirm ...' to save your configuration or press ESC at any time to cancel.
The other two Static Route choices are described in the next two chapters.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Description
Enter a descriptive name for this route. This is for identification purpose only.
This field allows you to activate/deactivate this static route.
This parameter specifies the IP network address of the final destination.
Routing is always based on network number. If you need to specify a route to
a single host, use a subnet mask of 255.255.255.255 in the subnet mask field
to force the network number to be identical to the host ID.
Enter the subnet mask for this destination. Please follow the discussion on IP
subnet mask in this chapter.
Enter the IP address of the gateway. The gateway is an immediate neighbor of
the Prestige that forwards the packet to the destination. On the LAN, the
gateway must be a router on the same segment as the Prestige. Over ISDN,
the gateway must be the IP address of one of the remote nodes.
See descriptions in the previous table.
ZyXEL
Page 8-7