Single User Account; Table 5-1 Fields In Menu 4 - Internet Access Setup - ZyXEL Communications Prestige 128IMH User Manual

Hide thumbs Also See for Prestige 128IMH:
Table of Contents

Advertisement

Prestige 128IMH User's Guide
Field
ISP' s Name
ISP IP Addr
Pri Phone and Sec
Phone Number
My Login Name
My Password

Single User Account

Telco Options: Transfer
Type
Nailed-up Connection

Table 5-1 Fields in Menu 4 - Internet Access Setup

After, the SMT asks if you wish to test the Internet connection. If you select Yes, the Prestige
will call the ISP to test the Internet connection. If the test fails, please note the error message
that you receive and take the appropriate troubleshooting steps.
5.2.
Typically, if there are multiple users on the LAN wanting to concurrently access the
Internet, they will have to subscribe to multiple IP addresses from the ISP which will cost
more than a single user account.
The Single User Account (SUA) feature gives you the same benefits as having multiple IP
addresses while only paying for one IP address, thus saving significantly on subscription
fees.
Additionally, this feature can be used to simplify the allocation of IP addresses when
connecting branch offices to a corporate network.
The IP address for the Prestige's Single User Account feature can be either static
(permanently assigned) or dynamic (assigned on a per use basis). In addition, you can also
configure the Prestige to assign a server IP address to one LAN workstation, making it
accessible by outside users.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Description
Enter the name of your Internet Service Provider, e.g., myisp.
This information is for identification purposes only.
Enter the IP Address of the remote gateway at the ISP' s site. If
you don' t have this data, just leave it blank.
Both the Primary and the Secondary Phone number refer to the
number that the Prestige dials to connect to the ISP.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
Please see the following section for a more detailed discussion
on the Single User Account feature. The default is Yes.
Select 64K, Leased, or Modem.
This can only be toggled if the Transfer Rate is 64K or modem
over ISDN. Otherwise, it is set at No.
Single User Account
ZyXEL
Page 5-3

Advertisement

Table of Contents
loading

Table of Contents