ZyXEL Communications Prestige 128IMH User Manual page 41

Prestige 128IMH User's Guide
The third choice is for Novell IPX Ethernet Setup shown below.
Figure 4-2 Novell IPX Ethernet Setup
This screen is discussed in further detail in chapter 9.
The fourth choice reveals the screen for Bridge Ethernet Setup, shown below.
Press Space Bar to Toggle.
Figure 4-3 Bridge Ethernet Setup
Refer to Chapter 10 for a discussion on Bridging Configuration.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 3.4 - Bridge Ethernet Setup
Handle IPX= None
Press ENTER to Confirm or ESC to Cancel:
ZyXEL
Page 4-9