Table of Contents
Advertisement
Prestige 128IMH User's Guide
Field
Active
Type
Server Address
Port #
Key
Table 14-1 Menu 23.2 - System Security - External Server
The Key password should be stored in the client file in the RADIUS server¡ ¦ s
/etc/raddb directory. Lines of the form
# Client Name
#-----------------------------
192.168.1.1
should be added to the client file. The Client Name field in the file gives the IP address
of the Prestige and the Key field should be the same as the Key field in menu 23.2.
After a RADIUS server has been configured, the Prestige uses it to authenticate all users
that it can't find in its internal remode nodes and dial-up user list (menu 14).
14.2.3.
The Prestige uses RADIUS mainly for user authentication - except for Password,
Dialback-No and the ZyXEL extensions Zyxel-Callback-Option and Zyxel-
Callback-Phone-Source (described below), most standard RADIUS attribute fields
are ignored by the Prestige.
To add a user to the RADIUS database, edit the users file in the RADIUS server¡ ¦ s
/etc/raddb directory and add a line similar to the following:
joeuser
Each user should have a user name/password record in the users database.
¿ ù » ~ ! © | ¥ ¼ © w ¸ q ¼ Ë ¦ ¡ ¡ C
Description
Determines whether the external security facility is enabled. If this field
contains No, only the built-in dial-up user list will be used. If this field
contains Yes, the built-in dial-up user list will be searched first, then the
external authentication server.
Determines the type of the external authentication server. At present,
only the RADIUS type is supported.
The IP address of your RADIUS server.
The port number used by the authentication server. The default value of
1645 should be used.
' The Password' used to identify the Prestige as a valid client of the
RADIUS authentication service.
Key
1234
Adding Users to the RADIUS Database
Password = joepassword
ZyXEL
Page 14-3
Advertisement
Table of Contents
