Firmware Upgrade; Lpd Queues - HP 630n - JetDirect Gigabit EN Print Server Administrator's Manual

Table 4-13 Miscellaneous Settings (continued)
Item

Firmware Upgrade

For print servers that support firmware upgrades, use this tab to upgrade the print server with new
features.
The firmware upgrade file for the print server must be available on your system. To identify and retrieve
the appropriate upgrade file, click HP Jetdirect Firmware Updates (Internet access required), or visit HP
online support at:
http://www.hp.com/go/webjetadmin_firmware
From the HP online firmware upgrade page, use the following steps:
1. Locate the print server model (or product number) and the upgrade file.
2. Check the upgrade file version and verify that it is more recent than the print server's installed
version. If it is, then download the file. If not, then you do not need to upgrade.
To upgrade the print server using the embedded Web server:
1. Enter the path to the upgrade file (Firmware File), or click Browse to locate it.
2. Click Upgrade Firmware.

LPD Queues

Use the LPD Queues page to specify LPD print queues on the HP Jetdirect print server. For more
information on LPD printing and print queues, see
You must enable LPD printing on the print server before you can set LPD queues. If LPD is disabled,
go to the Misc. Settings on page 79
If LPD printing is enabled, ten different named print queues are available. Four of these queues are
configured automatically and their parameters cannot be changed. You can configure the remaining six
queues.
NOTE: Value-based print servers do not support user-defined LPD queues.
You can set up the six modifiable queues with character strings, such as job control commands, that
are automatically added before or after the print job. You can define up to eight named strings, setting
each queue so that the named string either precedes (Prepend String Name) or follows (Append
String Name) the print data.
ENWW
Description
IPP Printing Internet Printing Protocol printing.
LPD Printing (RAW) Default LPD raw queue printing.
LPD Printing (TEXT) Default LPD text queue printing.
LPD Printing (AUTO) Default LPD auto queue printing.
LPD Printing (BINPS) Default LPD binary PostScript queue printing.
LPD Printing (<user-defined>) List up to 5 LPD queues (if configured), where <user-
defined> is the name of the user-specified LPD print queue.
The default depends on the printer, typically 9100 Printing or LPD Printing (BINPS).
LPD printing on page
tab and enable it.
155.
Networking tab 81