Generator Removal - Isuzu NHR 4J Series Workshop Manual

GENERATOR
ON-VEHICLE SERVICE
REMOVAL
Preparation
•
1. A/C Compressor Drive Belt (A/C Model)
•
•
2. A/C Compressor Assembly (A/C Model)
•
•
Disconnect battery ground cable.
Loosen the idler pulley lock nut
Loosen the adjust bolt and remove the drive belt.
Disconnect the clutch harness connector.
Remove the A/C compressor fixing bolts and
temporarily tighten the A/C compressor to chassis
frame side use the wire.
CHARGING SYSTEM 6D3 – 5
6D3-5-1.tif