Isuzu NHR 4J Series Workshop Manual page 353

6D3 – 8 CHARGING SYSTEM
2. A/C compressor Assembly (A/C Model)
• Install the compressor assembly and tighten bolts to
the specified torque.
Compressor Bolt Torque
• Connect the magnetic switch harness connector.
6D3-8-1.tif
1. A/C compressor Drive Belt (A/C Model)
• Install A/C compressor drive belt and adjust belt
tension.
• Depress the drive belt and mid-portion with a 98N (10
kg/ 22 lb) force.
Drive Belt Deflection
• Tighten the idler lock nut to the specified torque.
6D3-8-2.tif
Idle Pulley Lock Nut Torque
• Connect the battery ground cable.
6D3-8-3.tif
N∙m (kg∙m/lb∙ft)
19 (1.9/14)
8 (0.31) - 10 (0.39)
N∙m (kg∙m/lb∙ft)
27 (2.8/20)
mm (in)