Idling Control Cable; Idling Control Cable Removal; Idling Control Cable Installation - Isuzu NHR 4J Series Workshop Manual

6C - 62 ENGINE FUEL

IDLING CONTROL CABLE

REMOVAL
1. Idling Control Knob
• Loosen the idling control knob screw and remove the
knob from cable.
2. Idling Control Cable Nut
3. Wave Washer
4. Idling Control Cable
• Remove control cable from accelerator pedal bracket.
INSTALLATION
4. Idling Control Cable.
• Install Control Cable to Accelerator pedal bracket.
3. Wave Washer
2. Idling Control Cable Nut
• Insert the idling control cable into the specified hole of
the instrument panel.
• Install the washer to the cable, and tighten it with the
nut.
6C-61-1.tif