Isuzu NHR 4J Series Workshop Manual page 170

6. Power Steering Pump Bracket Assembly (P/S Model)
• Install the pipe bracket & clip and tighten bolts to the
specified torque.
Pipe Bracket Bolts Torque
Pipe Clip Bolts Torque
6A1-35-1.tif • Install the P/S pump & bracket assembly.
10M bolts
8M bolts
Lock nut
5. AC Generator Drive Belt
• Install AC Generator drive belt and adjust belt tension.
• Depress the drive belt mid-portion with a 98N
(10kg/22lb) force.
Drive Belt Deflection
• Install fixing bolt and tighten bolts to the specified
torque.
Generator Fixing Bolt
6A1-35-2.tif
Adjust Plate Fixing Bolt
4. A/C Compressor Drive Belt (A/C type)
• Install A/C compressor drive belt and adjust belt
tension.
• Depress the drive belt mid-portion with a 98N
(10kg/22lb) force.
Drive Belt Deflection
• Tighten the idler lock nut to the specified torque.
4JB1/4JB1T/4JB1TC/4JG2 – ENGINE 6A1 – 35
19 (1.9/14)
10 (1.0/87)
40 (4.1/30)
19 (1.9/14)
27 (2.8/20)
8 (0.31) - 12(0.47)
40 (4.1/30)
19 (1.9/14)
8 (0.31) - 12 (0.47)
27 (2.8/20)
N∙m (kg∙m/lb∙ft)
N∙m (kg∙m/lb∙in)
N∙m (kg∙m/lb∙ft)
N∙m (kg∙m/lb∙ft)
N∙m (kg∙m/lb∙ft)
mm (in)
N∙m (kg∙m/lbvft)
N∙m (kg∙m/lb∙ft)
mm (in)
N∙m (kg∙m/lb∙ft)