Engine Assembly; Engine Removal - Isuzu NHR 4J Series Workshop Manual

6A1 – 96 4JB1/4JB1T/4JB1TC/4JG2 - ENGINE

ENGINE ASSEMBLY

REMOVAL
Preparation:
• Disconnect Battery Ground Cable
• Drain Coolant
Removal steps
1. Transmission and clutch Assembly
2. Radiator Assembly
3. Intake air duct
4. Heater hose
5. Engine control cable
6. Glow plug harness
7. Fuel hose
8. Oil pressure switch harness
9. A/C Compressor Assembly.
(A/C model)
10. Power steering pump & bracket
Assembly
(Power steering model)
11. Actuator vacuum hose
(Exhaust brake model)
12. Vacuum pump hose
13. Front exhaust pipe
14. Support rubber
15. Engine Assembly
Installation steps
To install, follow the removal steps in
the reverse order.
6A1-96-1.tif