Isuzu NHR 4J Series Workshop Manual page 212

#
Wiring Connector
• Disconnect the wiring connectors from the car speed
sensor, the neutral switch and the back-up light switch.
$
Shift Cable and Select Cable
• Disconnect the shift cable and select cable on the
transmission side.
6A1-77-1.tif
%
Clutch Slave Cylinder
• Remove the clutch pipe fixing clips and the clip
bracket (Right hand drive models only).
6A1-77-2.tif
• Remove the slave cylinder assembly with the flexible
hose attached, and then tie it to the frame so that it
does not interface with servicing work.
6A1-77-3.tif
&
Exhaust Brake Assembly
'
Front Exhaust Pipe
6A1-77-4.tif
4JB1/4JB1T/4JB1TC/4JG2 – ENGINE 6A1 – 77