6A1 – 84 4JB1/4JB1T/4JB1TC/4JG2 - ENGINE
INSTALLATION
3. Flywheel
•
Apply engine oil to fixing bolts.
•
Tighten the flywheel bolts to the specified torque in two
steps using the Angular Tightening Method.
Follow the numerical order shown in the illustration.
Flywheel Bolt Torque
6A1-84-1.tif
2. Pilot Bearing
•
Install the pilot bearing using installer.
Pilot bearing Installer: 5-8522-0024-0
6A1-84-2.tif
1. Transmission and Clutch Assembly
2) Clutch
1) Transmission
Above works refer to "ENGINE ASSEMBLY" Section in
this manual.
1st Step
59 (6.0/43)
N∙m (kg∙m/lb∙ft)
2nd Step
60° - 90°