Camshaft, Tappet; Camshaft, Tappet Disassembly - Isuzu NHR 4J Series Workshop Manual

CAMSHAFT, TAPPET

DISASSEMBLY
1. Cylinder Head Assembly
2. Flywheel
3. Cylinder Block Rear Plate
4. Oil Pan Assembly
5. Oil Pump Assembly
6. Camshaft Timing Gear (Gear Drive Model)
• Remove the camshaft timing gear bolt from the
camshaft.
NOTE:
Hold the camshaft stationary to prevent the camshaft
from turning.
• Use the universal puller
timing gear
• Universal Puller: 5-8521-0002-0
Remove the thrust plate
6A-17-2.tif
GENERAL ENGINE MECHANICAL 6A – 17
!
to pull out the camshaft
"
.
#
.
6A-17-1.tif