•
Remove the support rubber nut from engine foot side.
•
Remove the support rubber while raising the engine.
6A1-7-1.tif
INSTALLATION
3. Support Rubber
•
Install the support rubber while raising the engine.
•
Tighten the fixing nuts to the specified torque.
Engine foot side
Crossmember side
6A1-7-2.tif
2. Fan shroud
•
Install the fan shroud and clip the reservoir tank hose.
1. Air Intake Duct
•
Install the air intake duct.
•
Connect battery ground cable.
6A1-7-3.tif
4JB1/4JB1T/4JB1TC/4JG2 – ENGINE 6A1 – 7
82 (8.4/61)
40 (4.1/30)
N∙m (kg∙m/lb∙ft)
N∙m (kg∙m/lb∙ft)