Starting System Removal; Starting System Installation - Isuzu NHR 4J Series Workshop Manual

ON-VEHICLE SERVICE
REMOVAL
Preparation
•
1. "50" Terminal
2. "30" Terminal
3. Earth Cable Terminal
4. Starter Assembly
5. Spacer (4JB1, Except cold area)
6D2-3-2.tif
INSTALLATION
5. Spacer (4JB1, Except cold area)
4. Starter Assembly
•
Starter Bolts and Nuts Torque
3. Earth Cable Terminal
•
Disconnect Battery Ground Cable.
Tighten the fixing bolt and nut to the specified torque
81 (8.3 / 60)
Connect the earth cable terminal.
STARTING SYSTEM 6D2 – 3
N∙m (Kg∙m/lb∙ft)
6D2-3-1.tif