6C - 60 ENGINE FUEL
ACCELERATOR PEDAL
REMOVAL
1. Idle Switch Connector
2. Accelerator Control Cable
•
Remove control cable from Accelerator pedal bracket.
3. Idling Control Cable
•
Remove control cable from accelerator pedal bracket.
4. Accelerator Pedal Assembly
•
Remove accelerator pedal assembly from brake pedal
bracket.
INSTALLATION
4. Accelerator Pedal Assembly
•
Apply the sliding section with grease, and install it to
the brake pedal bracket.
3. Idling Control Cable
•
Install the cable to the lever of the accelerator pedal
bracket.
2. Accelerator Control Cable
•
After confirming that the idling control knob is fully
turned to the left, install the accelerator control cable.
1. Idle Switch Connector
6C-59-2.tif
6C-59-1.tif