6A-48 ENGINE MECHANICAL (C22NE, 22LE, 20LE)
Inspection
Check contact pattern (I) on valve seat and in cylinder head.
Clean
Valves, valve guides, cylinder head.
Flywheel
Removal
1.
Remove transmission and clutch.
2.
Remove flywheel while locking with 5-88400-446-0.
Torque - Angle Method
Flywheel to crankshaft - 65 Nm/6.5 kgf⋅m.+30° to 45°
Important!
Use new bolts.
Do not apply grease to the thread.
Installation
1.
Install clutch and transmission.
Component Parts
Flywheel and Ring gear. (Manual Transmission)