Table of Contents
Advertisement
7-2-2 Virtual Com Type
7-2-2 Virtual Com Type
7-2-2-1 Virtual Com
With USB- COM type, user needs to use terminal software to receive the
barcode data.
Procedure:
(1) Scan "Enter" Barcode
(2) Scan "Virtual Com Default" Barcode
7-2-2-2 Transmission gap
This is the delay time setting between each barcode data characters. If the
delay time setting is too high, the application program may not be able to
receive all the barcode data characters due to transmission speed.
Configuration Range
Procedure:
(A) Scan "Enter" barcode
(B) Scan Transmission gap barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
ENTER
*/$%ENT*
*Z232*
*2052*
0 ~ 0.25 sec
7. General Configuration Setting
Unit
Default Setting
0.001 sec
Example:
If configuration is 0.02 sec, the
parameter value is 0.02 sec / 0.001
sec = 20
95
0
End
*ZEND*
Advertisement
Table of Contents
