Slave Mode Connection (For Third Party Bluetooth Devices) - Flash BT-49 User Manual

5. Bluetooth Connection Mode Instruction 5. Bluetooth Connection Mode Instruction
5-1 Slave mode Connection (For Third party

5-1 Slave mode Connection (For Third party Bluetooth devices)

Bluetooth devices)
Make sure the scanner is in Bluetooth mode; please refer to chapter
4-2-1 for how to configure in Bluetooth mode.
Make sure the Mode selection code is configured as "0". Please refer
to chapter 4-2-4-1.
Insert the third party Bluetooth dongle to PC, or build-in Bluetooth device in
windows system. Go to Control Panel. Please refer to the screen below.
Select Bluetooth devices; please refer to the following screen.
5. Bluetooth Connection Mode Instruction
39