Table of Contents
Advertisement
9. Output Format Setting
9 - 2- 4 Postamble Data
9-2-4 Postamble Data
Generally, your application needs to append a carriage return character to
finish data transmission. Or you may set the Postamble to be Disable to have
your application without any control characters appended after data
transmission. The factory default of Postamble Data is <CR> and <LF>. The
string of Postamble data will be behind the barcode data.
*838D*
Configuration
Max. Configurable Length
Default Setting
Please refer" ASCII
8 digits
(<CR> <LF>)
Code Table"
Example:
Append the code "<CR> <LF>" after barcode transmitted.
(1) Scan "Enter" barcode
(2) Scan "Postamble data" barcode
(3) Scan Hexadecimal barcode =>"0" =>"D" =>"0" =>"A" =>"OK"
(means set the Postamble Data value to "<CR> <LF>") Please refer to ASCII
table.
(4) Scan "End" barcode.
Note: Please make sure "Transmission Postamble "must be enabled
before the setting, please refer to 9-2-2.
ENTER
End
162
*/$%ENT*
*ZEND*
Advertisement
Table of Contents
