Table of Contents
Advertisement
9 – 6 Min. / Max. Length
9-6 Min./Max. Length
Some symbologies has its own Min./Max. Barcode Length. They can be
configured to qualify data entry. The length is defined by the actual barcode
length transmitted. If the barcode length is less than min. length, or over the
max. length, the barcode data will not be output.
There are few combinations for the setting:
(1) If Min. Length is 0 and Max Length is 0, the barcode data length is not
limited.
(2) If Min. Length is 0 and Max. Length is not 0, the barcode data will decode
by the length is under the Max. length.
(3) If Max. Length is 0 and Min. Length is not 0, the barcode data will decode
by the length is over the Min. length.
(4) If Min. Length and Max Length are specified, and Min. length = Max.
Length, the barcode data will only decoded by the length of Min. Length
value.
(5) If Min. Length and Max Length are specified, and Min. length < Max.
Length, the barcode data will decoded by the length is between the Min.
Length and the Max. Length
(6) If Min. Length and Max Length are specified, and Min. length > Max.
Length, the barcode data will only decoded by the length of two specified
value of Min. Length and Max. Length
ENTER
*/$%ENT*
9. Output Format Setting
169
End
*ZEND*
Advertisement
Table of Contents
