9 - 2- 2 Transmission Postamble
9-2-2 Transmission Postamble
This option enables to append data behind of the barcode data to be
transmitted. Please refer to the string output flow chart.
Procedure:
(A) Scan "Enter" Barcode
(B) Scan "Enable" or "Disable" Barcode
(C) Scan "End" Barcode
9 - 2- 3 Preamble Data
9-2-3 Preamble Data
There is control digits can be programmed as Preamble. It will be appended
automatically when each barcode is decoded. The string of Preamble data will
be before the barcode data.
Configuration
Please refer" ASCII
Code Table"
Example:
Append the code "<CR> <LF>" before barcode transmitted.
(1) Scan "Enter" Barcode
(2) Scan "Preamble data" Barcode
(3) Scan Hexadecimal Barcode =>"0" =>"D" =>"0" =>"A" =>"OK"
(This means set the Preamble Data value to "<CR> <LF>") Please refer to
ASCII table.
(4) Scan "End" Barcode
Note: Please make sure "Transmission Preamble " must be enabled
before setting, please refer to 9-2-1
ENTER
*/$%ENT*
*8C71*
Enable
*8C70*
Disable
*830D*
Max. Configurable Length
8 digits
161
9. Output Format Setting
Default Setting
NULL
*ZEND*
End