Table of Contents
Advertisement
7- 12 Double Confirm
7- 12 Double Confirm
7-12 Double Confirm
When the barcode label has been scanned, for the barcode data accuracy
purpose, user can configure "Double Confirm" function to perform the data
confirmation action. After the confirmation is done, then the barcode will be
decoded.
7-12-1 Double Confirm
7- 12-1 Double Confirm
7- 12-1 Double Confirm
This option enables the scanner to double confirm the barcode data, if this
option is enabled, the scanner will require more times to verify the barcode
data. This setting will related to the double confirm count configuration, the
more confirm counts will inhibit miss-reading barcodes.
*8B71*
*8B70*
7- 12- 2 Double Confirm Count
7- 12- 2 Double Confirm Count
7-12-2 Double Confirm Count
This enables the user to configure the double confirm count, selecting higher
value will affect the decoding speed.
Procedure:
(A) Scan "Enter" barcode
(B) Scan "Double Confirm Count" barcode
(C) Scan Scan parameters from Hexadecimal / Decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
ENTER
*/$%ENT*
Enable
Disable
*8102*
Configuration Range
1-99
7. General Configuration Setting
Procedure:
(A) Scan "Enter" Barcode
(B) Scan "Enable" or "Disable" Barcode
(C) Scan "End" Barcode
Default Setting
2
111
End
*ZEND*
Advertisement
Table of Contents
