Caps Lock - Flash BT-49 User Manual

7-2-1-2 Caps lock

Caps lock setting for the barcode data display.
Procedure:
(A) Scan "Enter" Barcode
(B) Scan Caps lock barcode
(C) Scan "End" Barcode
By selecting "Caps Lock On" or "Caps Lock Off" , scanner can get Caps Lock
status. If "Alt+Keypad" were selected, Caps Lock and output will be
independent. The Auto function can be effect when USB HID is enable. When
you set Auto, the scanner will detect the status of Keyboard Caps Lock. So the
barcode data output will follow the status of Keyboard Caps Lock.
Example Barcode data "ABCdef"
Status
Selection
Caps Lock On
Caps Lock Off
Alt+Keypad
ENTER
*/$%ENT*
7. General Configuration Setting
*1B80*
Auto
*1B81*
Alt+Keypad
*1B82*
Caps lock off
*1B83*
Caps lock On
Caps Lock Caps Lock Off
On
ABCdef abcDEF
abcDEF ABCdef
ABCdef ABCdef
89
End
*ZEND*