Table of Contents
Advertisement
6-1-8 Ext Transmission Delay
6-1-8 Ext Transmission Delay
This configuration enables the delay time (time gap) setting in between each
barcode data sending to PC.
Configuration Range
0 ~ 2.5 Sec
Procedure:
(A) Scan "Enter" barcode
(B) Scan Ext Transmission Delay
barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
6-1-9 Lamp Off Delay
6-1-9 Lamp Off Delay
The configuration enables the setting of duration time of scanner LED power
off.
Configuration Range
Procedure:
(A) Scan "Enter" barcode
(B) Scan "LampOff Delay" barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan "Set" barcode
(E) Scan "End" barcode
ENTER
*/$%ENT*
*7042*
Unit
0.01 sec
*7052*
0 ~ 2.5 Sec
0.01 sec
6. Memory / Bluetooth General Setting
Default Setting
0 sec
Example:
if configure to 1 sec.
the parameter value is: 1 sec / 0.01
sec = 100.
Unit
Default Setting
0 sec
Example:
If configuration is10 sec, the
parameter value is 10 sec / 1 sec
= 10.
.
69
End
*ZEND*
Advertisement
Table of Contents
