Table of Contents
Advertisement
7-2-1-3 Transmission Gap
This is the delay time setting between each barcode data characters. If the
delay time setting is too high, the application program may not be able to
receive all the barcode data characters due to transmission speed.
Configuration Range
0 ~ 0.25 sec
Procedure:
(A) Scan "Enter" barcode
(B) Scan Transmission gap barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
ENTER
*/$%ENT*
7. General Configuration Setting
*1052*
Unit
0.001 sec
Example:
If configuration is 0.02 sec, the
parameter value is 0.02 sec / 0.001
sec = 20
90
Default Setting
0
*ZEND*
End
Advertisement
Table of Contents
