Table of Contents
Advertisement
2-6 QUICK START GUIDE
2-6 QUICK START GUIDE
The Quick Start guide demonstrates how to connect the scanner with
Econnect Bluetooth Dongle, and some of the quick references. For detail
configuration with Bluetooth, please refer to related chapter.
Step 1 >
Insert Econnect Bluetooth Dongle to
USB port.
Step 2 >
Make sure the scanner is in Bluetooth mode. If scanner is in memory mode,
press and hold the scan key for few seconds until beep sound and blue LED
light indication OR scan the mode switching barcode in next Page.
Step 3>
When the scanner is in Bluetooth mode, press the scan key again and wait for
few seconds, the Bluetooth connection will automatically establish. If
connection successful, the Blue LED indicator will be on.
Step 4>
When Bluetooth Connection established, execute any word processing
software, for example: Word, notepad, Excel and etc. to receive to barcode
data.
Note: Bluetooth connection will switch to sleep mode if not in use; Press
Scan OR erase key once will reestablish the Bluetooth connection.
How to connect the scanner
with Econnect Bluetooth Dongle
2. Introduction
19
Procedure
Advertisement
Table of Contents
