Table of Contents
Advertisement
Procedure:
(A) Scan "Enter" barcode
(B) Scan Sub Code ID barcode
(C) Scan parameters from Hexadecimal/ decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
9 – 5 Wait Add-on Count
9 – 5 Wait Add-on Count
9-5 Wait Addon Count
This setting is used for WPC add-on code, such as UPC-A, UPC-E, EAN-13
and EAN-8. The WPC code must be decoded first, then Add-on code. Add-on
code may not be decoded with WPC at the same time. Therefore, you can set
wait add-on count to force the add-on code must be output with WPC code
together.
Procedure:
(A) Scan "Enter" barcode
(B) Scan "Wait Addon Count" barcode
(C) Scan parameters from Hexadecimal/ decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
ENTER
*/$%ENT*
*8132*
Configuration Range
0 ~ 99
168
9. Output Format Setting
Default setting
10
*ZEND*
End
Advertisement
Table of Contents
