4-2-5-2 Remote Mac Address
Mac address configuration, total of 12 digits, Please refer to the HEX ASCII
table (From 0~9, A~F).
Configuration
Hexadecimal /
decimal
barcode table
Procedure:
(1) BT Module Enter: (Enter Bluetooth setting)
(2) "Remote Mac address"
(3) Scan Hexadecimal/Decimal Barcode table for input parameters.
(4) OK : (Selection confirmed)
(5) End: (Exit setting)
Example:
Set Remote Mac Address to 00126F006EAA
A. Scan "BT Module Enter" barcode
B. Scan "Remote Mac Address" barcode
C. Scan parameters from Hexadecimal /decimal barcode table =>"0", "0",
"1","2", "6","F", "0","0", "6","E", "A","A"
" value to 00126F006EAA)
D. Scan "End" barcode
Note:
(1) If scanner connection mode is"Slave" or "HID" or "iPad OSK" Mode, Mac
Address configuration does not required.
(2)If scanner connection mode is "Master" or "Econnect Bluetooth Dongle I" or
"Econnect Bluetooth Dongle II" mode, configuration of Mac address does
required, and the configuration cannot be "000000000000"
Max. Configurable Length
12 digits
34
4. Memory / Bluetooth Mode
Default Setting
000000000000
*/$%BTM*
*ZBT2*
*%OK*
*ZEND*
"OK" (Set "Remote Mac Address