Usb-Com Mode - Flash BT-49 User Manual

5-3-2 USB-COM mode

5-3-2 USB COM MODE
Make sure the scanner is in Bluetooth mode. Please refer to above
sections of how to configure in Bluetooth mode.
Make sure the Mode selection code is configured as "2".
Insert Econnect Bluetooth Dongle to PC.
When connecting scanner and Bluetooth Dongle,
Press and hold the Pairing/delete (small) key until blue
LED flashing rapidly, and then release it. The scanner
will establish the Bluetooth connection. If connection
successful, the Blue LED indicator will be on. If not,
please repeat the above mention action or check the
Bluetooth parameters setting.
If the user wants to switch between USB-HID/ USB- COM mode, please
scan the following barcode.
ENTER
(Enter configuration)
Note: Before scan the barcode, make sure the scanner and the Bluetooth
Dongle is in paired status.
5. Bluetooth Connection Mode Instruction 5. Bluetooth Connection Mode Instruction
USB-HID
USB-COM
51