Table of Contents
Advertisement
5- 6 Econnect Bluetooth Dongle Mode II
5- 6 Econnect Bluetooth Dongle Mode II
5-6 Econnect Bluetooth Dongle II Mode CONNECTION (USB-HID only)
Connection (USB-HID only)
Connection (USB-HID only)
Make sure the scanner is in Bluetooth mode. Please refer to chapter
4-2-1 for how to configure in Bluetooth mode.
Make sure the Mode selection code is configured as "5". Please refer
to chapter 4-2-4-6
Insert Econnect Bluetooth Dongle to PC.
Insert Econnect Bluetooth Dongle to PC.
When connecting scanner and Bluetooth Dongle,
Press and hold the Pairing/delete (small) key until blue
LED flashing rapidly, and then release it. The scanner
will establish the Bluetooth connection. If connection
successful, the Blue LED indicator will be on. If not,
please repeat the above mention action or check the
Bluetooth parameters setting.
When Bluetooth Connection established, execute any word
processing software, for example: Word, notepad, Excel and etc. to
receive to barcode data.
5. Bluetooth Connection Mode Instruction
62
Advertisement
Table of Contents
