Table of Contents
Advertisement
7- 13 Global Min./ Max. Length
7-13 Global Min. / Max. Length
When configuring the "Min. length" of barcode digits, if the barcode label digit
is less than the configured "Min. length", the barcode label will not be decoded.
If configuring the "Max. length" of the barcode digits, if the barcode label digit is
greater than the configured "Max. length", The barcode label will not be
decoded.
Please note that the values setting will not affect in some fixed length
symbologies (i.e. UPC and EAN).
There are few combinations for the setting:
(1) If Min. Length is 0 and Max Length is 0, the barcode data length is not
limited.
(2) If Min. Length is 0 and Max. Length is not 0, the barcode data will decode
by the length is under the Max. length.
(3) If Max. Length is 0 and Min. Length is not 0, the barcode data will decode
by the length is over the Min. length.
(4) If Min. Length and Max Length are specified, and Min. length = Max.
Length, the barcode data will only decoded by the length of Min. Length
value.
(5) If Min. Length and Max Length are specified, and Min. length < Max.
Length, the barcode data will decoded by the length is between the Min.
Length and the Max. Length
(6) If Min. Length and Max Length are specified, and Min. length > Max.
Length, the barcode data will only decoded by the length of two specified
value of Min. Length and Max. Length
ENTER
*/$%ENT*
7. General Configuration Setting
112
End
*ZEND*
Advertisement
Table of Contents
