Table of Contents
Advertisement
9 - 4 -2 Sub Code ID Setting
9-4-2 Sub Code ID Setting
Under the circumstances list below, the "Sub Code ID" will substitute with
"Code ID".
1. "Expansion" for UPC-E is set as "Enable"
2.
"ISBN/ISSN
3. "Expansion" for EAN-8 is set as "Enable"
4.
"Code 32
translation" for Code-39 is set as "Code-32" or
and " Type" for
5. "Type" for Code-128 to be set "UCC-128"
It will be prefixed in front or behind the barcode data (Code ID Position can be
configured). There are some symbologies (i.e. EAN-8) include 2 Sub Code ID.
If your application needs Sub Code ID, please enable the "Transmission Code
ID" function.
*B14B*
Sub Code ID for UPC-E
*D14B*
Sub Code ID for EAN-8
*F14B*
Sub Code ID for Code-128
Configuration
Please refer" ASCII
Code Table"
ENTER
*/$%ENT*
Conversion" for EAN-13 is set as "Enable"
Full
ASCII.
Max. Configurable Length
2 digits
9. Output Format Setting
*C14B*
Sub Code ID for EAN-13
*E14B*
Sub Code ID for Code-39
Please refer to 8-1
section for default
167
"Code-32
with'A',
Default Setting
value.
End
*ZEND*
Advertisement
Table of Contents
