Led Indication Under Bluetooth Mode - Flash BT-49 User Manual

4-2-2 LED indication under Bluetooth Mode

4-2-2 LED indication under Bluetooth Mode 4-2-2 LED indication under Bluetooth Mode
Status
Red ON
Orange Green LED
& Flashing
Green
Orange LED
Flashing
Orange LED
ON
Blue
Flashing
ON
When scan key is pressed, if red LED is ON, this means the
power is low and needs to be recharge soon.
When scan key is pressed, and the green LED is blinking, this
means the barcode scanning function is ready.
To disconnect the Bluetooth connection, press the
for 3 seconds until the orange LED turns from steady to
blinking. With this action, the power will also be shut down.
To power on the scanner, press
When scanner is set as iPad OSK mode and the connection
with iOS is successful, press the
disable the virtual keyboard in iOS.
Under Bluetooth mode, and Bluetooth connection is not yet
connected, the blue LED indicator will be flash per 3 seconds.
Under Bluetooth Mode and if Bluetooth connection is not
connected, Press and Hold the
indicator flashing rapidly, at this time, release the delete key for
Bluetooth pairing with your device.
When power on and if Bluetooth is connected, the blue LED
will be on.
28
4. Memory / Bluetooth Mode
Description
scan or delete key
delete key (once)
delete key until BLUE LED
delete key
again
to enable or