Function Keys And Led Indicator - Flash BT-49 User Manual

2-5 FUNCTION KEYS AND LED INDICATOR

2-5 FUNCTION KEYS AND LED INDICATOR
 Scan key: Read or store barcode data. Green LED will be indicated
when scan key pressed.
Erase key:
 Erase single data: press the erase key and point to the
 Erase all data: press and hold the erase key for approximately
 Power indicator: When the battery is running low, pressing the scan
key, the red LED will be indicated. During the recharging process, the red
LED will be always on. When recharging process is completed, the red
LED will be flashing slowly while cable is still plugged in.
 Good read indicator: When the barcode is successfully read, the
orange LED will be indicated.
 Wireless indicator: When initiating Bluetooth connection Blue LED
will be flashing, if connection established, Blue LED will be always on.
 USB Port: Battery charging or data transmission.
 Lanyard hole
previous scanned barcode, this action will erase the last
previous saved barcode data from the memory.
8 seconds until the red light indicator on, and beep sound
indicates. All barcode data saved in the memory will be
erased.
2. Introduction
18