Table of Contents
Advertisement
6. Memory / Bluetooth General Setting
6. Memory / Bluetooth General Setting
6-1 General Memory Mode Setting – By User Manual
6-1 General Memory Mode Setting – By User Manual
6-1 General Memory Mode Setting – By User Manual
6-1-1 Header Transmis
6-1-1 Header Transmission
6-1-1 Header Transmission
Under memory mode, when connecting the USB cable with the scanner,
press the small key will transmit the saved barcode data from memory to pc.
The user will be able to verify the barcode data saved in the memory by the
header <Memory><End>. User can enable / Disable the function by scanning
the following barcode.
6-1-2 Date & Time Transmission
6-1-2 Date & Time Transmission
6-1-2 Date & Time Transmission
Under Memory mode, when connecting the USB cable with the scanner to
perform the data uploading action. User can enable / disable the time stamp
function in front of the barcode data.
ENTER
*/$%ENT*
6. Memory / Bluetooth General Setting
*7A00*
Disable
*7A01*
Enable
*7A10*
Disable
*7A11*
Enable
Procedure:
(A) Scan "Enter" Barcode
(B) Scan "Enable" or "Disable" Barcode
(C) Scan "End" Barcode
64
End
*ZEND*
Advertisement
Table of Contents
