Table of Contents
Advertisement
5-1-1 receive barcode data by WINDOWS HYPER TERMINAL in slave mode
5-1-1 receive barcode data by WINDOWS HYPER TERMINAL in slave mode
5-1-1 Receiving barcode data by HYPER TERMINAL (Slave mode)
Hyper Terminal COM port selection in Slave Mode:
Execute "Hyper Terminal" and set the connection as "Outgoing COM
port (COM5)". Please refer to the screen below.
After specified the COM port, select "OK"
button for connection. When the connection
succeeded, it will indicate with a beep
sound.
COM port setting: Baud rate: 115200, Data bits:8 bits, Stop Bits: 1 Bits, Parity:
None.
5. Bluetooth Connection Mode Instruction
When configuration with hyper terminal succeeded, it
is ready to receive the barcode data from scanner.
44
Advertisement
Table of Contents
