Memory Mode - Flash BT-49 User Manual

4. Memory / Bluetooth Mode Explanation
This chapter explains the different functions between Memory function and
Bluetooth function.
Note: If user only purchase Memory scanner model, switching to
Bluetooth mode is not applicable.

4-1 Memory Mode

4-1 Memory Mode
4-1 Memory Mode
4-1-1 Function switch (Bluetooth mode to Memory mode)
4-1-1 Function switch (Bluetooth mode to Memory mode)
4-1-1 Function switch (Bluetooth mode to Memory mode)
There are two methods of switching from Bluetooth mode to Memory mode:
1) Press and hold the scan key for 8 seconds,
the green LED indicator will flash until a beep
sound indicated.
OR
2) Scan the following barcode to switch from Bluetooth Mode to Memory
Mode.
4-1-2 Transmitting barcode data in memory mode
4-1-2 Transmitting barcode data in memory mode
4-1-2 Transmitting barcode data in memory mode
There are two methods of sending the barcode data from barcode scanner.
1) Connect the USB cable between scanner and PC,
hold the erase key for few seconds. The barcode data
will transmit all the scanned barcode data to
your word processing software,
e.g. Word, excel, or notepad.
4. Memory / Bluetooth Mode
*/$%TOM*
Switch from Bluetooth to Memory Mode
25