7- 4- 5 Continue
7-4-5 Continue
This configuration enables the scanning LED always ON, this function can
read the barcode continuously without triggering.
Procedure:
(A) Scan "Enter" Barcode
(B) Scan "Continue" Barcode
(C) Scan "End" Barcode
7- 4- 6 Test
7-4-6 Test
This option enables the scanner to keep reading continuously, and same
barcode reading is allowed without double confirm. The feature can test the
scanning performance and sensitivity. (Diagnostic mode Only)
Procedure:
(A) Scan "Enter" Barcode
(B) Scan "Test" Barcode
(C) Scan "End" Barcode
ENTER
*/$%ENT*
7. General Configuration Setting
*8AC1*
*8AC0*
104
End
*ZEND*