Table of Contents
Advertisement
6-1-10 Standby Time
6-1-10 Standby Time
This configuration enables the time configuration for the main power switching
off after scanner LED turned off.
Configuration Range
0 ~ 99 sec
Procedure:
(A) Scan "Enter" barcode
(B) Scan "Standby Time" barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
6-1-11. Separator
6-1-11. Separator
This configuration enables separator setting in between date, time and
barcode data. In order for the date and time to be display in front of each
barcode data, Date & time transmission must be enabled.
Configuration
Please refer to ASCII
table
Procedure:
(A) Scan "Enter" barcode
(B) Scan Separator barcode
(C) Scan parameters from
Hexadecimal / Decimal table
(D) Scan "OK" barcode
(E) Scan "End" barcode
ENTER
*/$%ENT*
6. Memory / Bluetooth General Setting
*7062*
Unit
1 sec
Example:
If configuration is10 sec, the
parameter value is 10 sec / 1 sec
= 10.
*707A*
Max. configurable range
1 digit
Example:
If configuration is "+",
the parameter value is " 2,B
(Refer to ASCII TABLE).
70
Default Setting
0 sec
Default setting
' '
*ZEND*
+ ".
End
Advertisement
Table of Contents
