5.6.2.2
Configuring the Fax / Modem / CID Settings
To configure the Fax / Modem / CID Settings parameters, take
these 4 steps:
Open the 'Fax / Modem / CID Settings' screen (Advanced Configuration menu >
1.
Media Settings > Fax / Modem / CID Settings option); the 'Fax / Modem / CID
Settings' screen is displayed.
Configure the Fax / Modem / CID Settings according to
2.
Click the Submit button to save your changes.
3.
To save the changes so they are available after a power fail, refer to Section
4.
page 193.
Table 5-28: Media Settings, Fax/Modem/CID Parameters (continues on pages 142 to 144)
Parameter
Fax Transport Mode
[FaxTransportMode]
Caller ID Transport Type
[CallerIDTransportType]
H.323 User's Manual
Figure 5-39: Fax / Modem / CID Settings Screen
Description
Fax Transport Mode that the gateway uses.
You can select:
Disable [0] (transparent mode).
T.38 Relay [1] (default).
Bypass [2].
Events Only [3].
Note: If parameter IsFaxUsed = 1, then FaxTransportMode is always set to
1 (T.38 relay).
N/A.
Table
142
Mediant 1000
5-28.
5.9.2
Document #: LTRT-83401
on