Table of Contents
Advertisement
Supplying constant current
1 Press Current to select the constant current mode. When the U3606A is
2 The output current can be programmed when the output is enabled
3 Press
4 Press
5 Press Current again, Shift > Save, or Shift >
6 Press
N O T E
U3606A User's and Service Guide
operating in constant current mode, the CC annunciator on the front
panel is illuminated.
(OUT) or disabled (SBY). Ensure that the CC annunciator is flashing.
(Press Current again if it is not.)
or
to select which digit position to be changed.
or
to increase or decrease the value.
exit the edit mode.
O U T
to regulate the output current.
S BY
The output current is limited by the range selected. Press Shift >
select an appropriate range. You can only select a range when the output
is disabled (the SBY annunciator is illuminated).
DC Power Supply Operation
CC annunciator
Exit
to save the changes and
3
Basic Operation
Range
to
77
Advertisement
Table of Contents
