Table of Contents
Advertisement
C A U T I O N
U3606A User's and Service Guide
Avoid connecting the load leads from the rear terminal block to the
load as shown above. Loosening the top screws at an inclined angle
will damage the terminal block screws. See
to the rear terminal block"
the load leads from the rear terminal block to the load.
DC Power Supply Operation
Do not loosen the top
screws of the rear
output terminal block
at a tilted angled.
"Connecting the load leads
on page 101 for the proper steps to connect
3
Remote Sensing
103
Advertisement
Table of Contents
