Table of Contents
Advertisement
Measuring low-resistance
1 Press Shift >
Table 2-6 Low-resistance measurement summary
Available ranges
Measurement method
Input protection
2 Connect the first red and black test leads to output terminals
3 Connect the second red and black test leads to input terminals
4 Probe the test points and read the display.
U3606A User's and Service Guide
Lo Ω
Lo Ω annunciator is shown on the display.)
Item
(FORCE +) and
(SENSE +) and LO (SENSE –) respectively as shown in
to make 4- wire low- resistance measurements. (The
Lo Ω annunciator
Description
100 mΩ, 1000 mΩ, 10 Ω
Four-wire, the test current is sent from the FORCE terminals and the
resistance is measured by the SENSE terminals.
• FORCE terminals: 1000 V
A/250 V FF fuse
• SENSE terminals: 1000 V
(FORCE –) respectively as shown in
Digital Multimeter Operation
Making Measurements
on all ranges, protected with a 3.15
dc
on all ranges, < 0.3 A short circuit
rms
Figure 2-
Figure 2-
2
4.
4.
37
Advertisement
Table of Contents
